I I I
THE MIG/MAG FAMILY – DEMODULAR/MODULAR

Every welding task is different – and so is every welder. That’s why we don’t just offer one MIG/MAG multi-process welding machine, we offer a whole family! And one thing is consistent throughout the family: each machine allows you to weld comfortably and economically while achieving optimal results – whether it’s a demodular machine like the Titan XQ puls, Phoenix XQ puls or Taurus XQ Synergic; or modular such as Phoenix XQ puls, Taurus XQ Synergic or Taurus XQ Basic.

Too good to be true?
Discover the variants for yourself ...

Demodular

Whether you’re working with a decompact system with separate wire feeder on large components or in hard-to-reach areas or with the compact variants in the welding booth: the XQ range (both gas- and water-cooled) offers you a custom solution for all your needs. The machines boast an above-average duty cycle to make your work more effective and, thanks to the wide range of accessories, there’s always a machine to meet any special, unusual requirements. What’s more, each machine can be individually configured.

Modular

Modular casing system for workstations in all kinds of environments. Gas- or water-cooled. Flexible design: suitable for use both in production or as a mobile machine on the construction site or job. Portable or on a trolley. Space-saving and lightweight design guarantees flexibility and mobility.

Click for demodular

Click for modular

Demodular (close)

Overview

Technical data – Titan XQ 350 puls

Version	Titan XQ 350 puls D W R1 5m
Setting range for welding current	5 A - 350 A
Duty cycle 40 °C	350 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	19.3 kVA
Power consumption Pi	26 W
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	128.5 kg / 283.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Technical data – Titan XQ 400 puls

Version	Titan XQ 400 puls D W R1 5m
Setting range for welding current	5 A - 400 A
Duty cycle 40 °C	400 A / 80 %
	370 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	23.8 kVA
Power consumption Pi	26 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	128.5 kg / 283.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Technical data – Titan XQ 500 puls

Version	Titan XQ 500 puls D W R1 5m
Setting range for welding current	5 A - 500 A
Duty cycle 40 °C	500 A / 80 %
	470 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	34 kVA
Power consumption Pi	28 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	128.5 kg / 283.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Technical data – Titan XQ 600 puls

Version	Titan XQ 600 puls D W R1 5m
Setting range for welding current	5 A - 600 A
Duty cycle 40 °C	600 A / 40 %
	550 A / 60 %
	470 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	46 kVA
Power consumption Pi	28 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	128.5 kg / 283.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Technical data – Titan XQ 350 puls C

Version	Titan XQ 350 puls C W HP R1 5m
Setting range for welding current	5 A - 350 A
Duty cycle 40 °C	350 A / 80 %
	320 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	19.3 kVA
Power consumption Pi	34 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Factory-installed roll equipment	1,0-1,2 mm UNI / Steel
Spool diameter	D200/D300
Torch connection	Euro torch connector
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	131 kg / 288.9 lbs
Standards	IEC 60974-1, -2, -5 and -10 CL.A

Technical data – Titan XQ 400 puls C

Version	Titan XQ 400 puls C W HP R1 5m
Setting range for welding current	5 A - 400 A
Duty cycle 40 °C	400 A / 60 %
	350 A / 80 %
	320 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	23.8 kVA
Power consumption Pi	34 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Factory-installed roll equipment	1,0-1,2 mm UNI / Steel
Spool diameter	D200/D300
Torch connection	Euro torch connector
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	131 kg / 288.9 lbs
Standards	IEC 60974-1, -2, -5 and -10 CL.A

Titan XQ puls welding processes

Welding process finder

rootArc® XQ/rootArc® puls XQ

coldArc® XQ/coldArc® puls XQ

forceArc® XQ/forceArc® puls XQ

wiredArc XQ/wiredArc puls XQ

acArc puls XQ

Positionweld XQ
superPuls

Puls

Standard (MIG/MAG)

TIG and MMA welding, gouging

Technical data – Phoenix XQ 350 puls

Version	Phoenix XQ 350 puls D W R1 5m
Setting range for welding current	5 A - 350 A
Duty cycle 40 °C	350 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	19.3 kVA
Power consumption Pi	26 W
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	128.5 kg / 283.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Technical data – Phoenix XQ 400 puls

Version	Phoenix XQ 400 puls D W R1 5m
Setting range for welding current	5 A - 400 A
Duty cycle 40 °C	400 A / 80 %
	370 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	23.8 kVA
Power consumption Pi	26 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	128.5 kg / 283.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Technical data – Phoenix XQ 500 puls

Version	Phoenix XQ 500 puls D W R1 5m
Setting range for welding current	5 A - 500 A
Duty cycle 40 °C	500 A / 80 %
	470 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	34 kVA
Power consumption Pi	28 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	128.5 kg / 283.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Technical data – Phoenix XQ 600 puls

Version	Phoenix XQ 600 puls D W R1 5m
Setting range for welding current	5 A - 600 A
Duty cycle 40 °C	600 A / 40 %
	550 A / 60 %
	470 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	46 kVA
Power consumption Pi	28 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	128.5 kg / 283.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Technical data – Phoenix XQ 350 puls C

Version	Titan XQ 350 puls C W HP R1 5m
Setting range for welding current	5 A - 350 A
Duty cycle 40 °C	350 A / 80 %
	320 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	19.3 kVA
Power consumption Pi	34 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Factory-installed roll equipment	1,0-1,2 mm UNI / Steel
Spool diameter	D200/D300
Torch connection	Euro torch connector
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	131 kg / 288.9 lbs
Standards	IEC 60974-1, -2, -5 and -10 CL.A

Technical data – Phoenix XQ 400 puls C

Version	Titan XQ 400 puls C W HP R1 5m
Setting range for welding current	5 A - 400 A
Duty cycle 40 °C	400 A / 60 %
	350 A / 80 %
	320 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	23.8 kVA
Power consumption Pi	34 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Factory-installed roll equipment	1,0-1,2 mm UNI / Steel
Spool diameter	D200/D300
Torch connection	Euro torch connector
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	131 kg / 288.9 lbs
Standards	IEC 60974-1, -2, -5 and -10 CL.A

Phoenix XQ puls welding processes

Welding process finder

rootArc® XQ/rootArc® puls XQ

forceArc® XQ/forceArc® puls XQ

Positionweld XQ for aluminium

superPuls

Puls

Standard (MIG/MAG)

TIG and MMA welding, gouging

Technical data – Taurus XQ 350 Synergic

Version	Taurus XQ 350 Synergic D W R1 5m
Setting range for welding current	5 A - 350 A
Duty cycle 40 °C	350 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	19.3 kVA
Power consumption Pi	26 W
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	128.5 kg / 283.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Technical data – Taurus XQ 400 Synergic

Version	Taurus XQ 400 Synergic D W R1 5m
Setting range for welding current	5 A - 400 A
Duty cycle 40 °C	400 A / 80 %
	370 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	23.8 kVA
Power consumption Pi	26 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	128.5 kg / 283.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Technical data – Taurus XQ 500 Synergic

Version	Taurus XQ 500 Synergic D W R1 5m
Setting range for welding current	5 A - 500 A
Duty cycle 40 °C	500 A / 80 %
	470 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	34 kVA
Power consumption Pi	28 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	128.5 kg / 283.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Technical data – Taurus XQ 600 Synergic

Version	Taurus XQ 600 Synergic D W R1 5m
Setting range for welding current	5 A - 600 A
Duty cycle 40 °C	600 A / 40 %
	550 A / 60 %
	470 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	46 kVA
Power consumption Pi	28 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	128.5 kg / 283.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Technical data – Taurus XQ 350 Synergic C

Version	Titan XQ 350 puls C W HP R1 5m
Setting range for welding current	5 A - 350 A
Duty cycle 40 °C	350 A / 80 %
	320 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	19.3 kVA
Power consumption Pi	34 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Factory-installed roll equipment	1,0-1,2 mm UNI / Steel
Spool diameter	D200/D300
Torch connection	Euro torch connector
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	131 kg / 288.9 lbs
Standards	IEC 60974-1, -2, -5 and -10 CL.A

Technical data – Taurus XQ 400 Synergic C

Version	Titan XQ 400 puls C W HP R1 5m
Setting range for welding current	5 A - 400 A
Duty cycle 40 °C	400 A / 60 %
	350 A / 80 %
	320 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	23.8 kVA
Power consumption Pi	34 W
Wire feed speed	0.5 m/min - 25 m/min
	19.685 ipm - 984.253 ipm
Factory-installed roll equipment	1,0-1,2 mm UNI / Steel
Spool diameter	D200/D300
Torch connection	Euro torch connector
Cooling capacity at 1 l/min.	1500 W
Pump pressure	3.5 bar
Tank capacity	8 l
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	1150 mm x 678 mm x 972 mm
	45.3 inch x 26.7 inch x 38.3 inch
Weight	131 kg / 288.9 lbs
Standards	IEC 60974-1, -2, -5 and -10 CL.A

Taurus XQ Synergic welding processes

Welding process finder

rootArc® XQ

forceArc® XQ

superPuls

Puls

Standard (MIG/MAG)

TIG and MMA welding, gouging

An overview of the EWM XQ series
/   rootArc® XQ / rootArc® puls XQ

/   coldArc® XQ / coldArc® puls XQ

/   forceArc® XQ / forceArc® puls XQ

/   wiredArc XQ / wiredArc puls XQ

/   Standard (MIG/MAG)

/   Pulse

/   Positionweld

/   superPuls

/   TIG

/   MMA

/   Gouging
/   rootArc® XQ / rootArc® puls XQ

/   forceArc® XQ / forceArc® puls XQ

/   Standard (MIG/MAG)

/   Pulse

/   Positionweld for aluminium

/   superPuls

/   TIG

/   MMA

/   Gouging
/   rootArc® XQ

/   forceArc® XQ

/   Standard (MIG/MAG)

/   superPuls

/   TIG

/   MMA

/   Gouging
The XQ welding processes:

rootArc XQ/rootArc puls XQ – Perfect root welding, easy-to-execute filler and final passes

coldArc XQ/coldArc puls XQ – Heat-minimised arc for thin metal sheet welding

forceArc XQ/forceArc puls XQ – Powerful high-performance arc with deep penetration

wiredArc XQ/wiredArc puls XQ – Powerful high-performance arc with penetration independent of stick-out thanks to dynamic wire control (penetration stabilisation)

Standard – Perfect short and spray arcs

Pulse – Low-spatter pulsed arc

Positionweld – Simple positional welding without the “Christmas tree” technique

superPuls – Heat-reduced interval welding between two operating points (high-current and low-current phases freely adjustable)

XQ series – individually configurable welding machine

XQ – a series of perfection. Individually configurable casing design for more flexibility thanks to a wide range of options.

Titan XQ puls
Phoenix XQ puls
Taurus XQ Synergic decompact
With a wide range of options and accessories for the Drive XQ wire feeder, the 350 A, 400 A, 500 A and 600 A models (either gas or water cooled) can be adapted to all your requirements.
XQ series with double wire feeder
Customised design with and without a gas cylinder holder for one or two cylinders, mains cable length of up to 15 m, versions for two wire feeders and much more.>
XQ series compact
with integrated eFeed wire feeder. In conjunction with the optional miniDrive intermediate drive, the action radius can be expanded to up to 30 m.
XQ series compact with connection for a second wire feeder
with integrated eFeed wire feed mechanism. A second separate wire feeder can be connected to the compact system. This enables you to switch effortlessly between two different wires and shielding gases.

Drive XQ wire feeders – great options to make life easier

Drive XQ wire feeder
At just 13 kg (excl. wire spool) and with a balanced, ergonomic handle, the Drive XQ wire feeder is the perfect companion for impassable scaffolding, hard-to-reach work spaces or large components – it can even fit through manholes.
- MIG/MAG wire feeder for XQ welding machines
  
  Suitable for 200-mm or 300-mm wire spools
  
  Easy to transport thanks to its low weight and compact design
  
  Interior lighting
  
  Stable base construction (continuous cast aluminium) with sliding rails as standard
  
  Transparent protective cap – welding parameters visible at all times
  
  Robust electronics protected in a dust-free area
  
  Protected arrangement of connections for intermediate hose packages and control cables
  
  Non-specialist staff can change hose packages without tools
  
  eFeed: innovative 4-roll drive (quadruple meshing)
  
  Equipped with 1.0–1.2-mm UNI rolls for low to high-alloy steel
- DGC – electronic gas flow control: Save gas with ease and accuracy (optional)
  
  Prevents welding errors caused by too much or too little gas
  
  Efficiency through gas savings thanks to accurate settings
  
  Fully reproducible thanks to digital configuration and saving to the respective JOB (welding task)
  
  Constant gas flow rate thanks to electronic adjustment
  
  Digital display of nominal and actual gas flow rate values in l/min
  
  Extremely advantageous with long hose packages, e.g. for shipbuilding and steel construction
  
  No gas blast with turbulence when igniting the arc as the electrical valve opens and closes gently
- WRS – wire reserve sensor: no unexpected occurrences during welding
  
  The sensor warns at 10% residual quantity of the wire spool by means of a control lamp.
  
  It reduces the risk of seam errors occurring due to the wire running out during welding.
  
  A spool change can be planned in advance, which reduces downtime.
- WHS – wire spool heater: regulated heat for better seam quality (optional)
  
  The wire is pre-heated, which reduces the build-up of moisture on the welding wire.
  
  The temperature is regulated at 50 °C (adjustable).
  
  The welding results are perfect, especially for aluminium.
- Electrode holder connection (optional)
  
  Ideal for MMA welding
  
  Ideal for gouging
Drive XQ IC 200 wire feeder
Weighing in at just 10 kg, this robust, resilient machine is perfect for work on shipyards and in hard-to-reach places.
- Drive XQ IC 200 wire feeder
  
  MIG/MAG wire feeder for XQ welding machines
  
  Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires
  
  Easy to transport thanks to its low weight and compact design
  
  Suitable for 5-kg D200 wire spools
  
  Lightweight and robust design, ideal for shipyard applications
  
  Robust electronics protected in a dust-free area
  
  Optionally with integrated flow meter
- Flow meter (optional)
  
  Optional analogue gas flow rate adjustment with gas flow meter
  
  Flow meter for setting the shielding gas flow manually
  
  Precise setting and checking of the gas quantity at the welding site
  
  Extremely advantageous with long hose packages, e.g. for shipbuilding and steel construction
- Securely connected
  
  Retrofitting option: Water cooling for wire feeder
  
  Key switch – control shut-off to protect against operator error
  
  Tool-free changing of intermediate hose packages
  
  Easy-to-access, internal hose package connections, fully protected thanks to cover cap
  
  Strain-relieved hose package thanks to quick connect coupling system
- Handle/ON TG D12 (optional)
  
  Retrofitting option: Carrying handle and strap
- Transparent cover lens
  
  Transparent cover lens for wire feed controls
  
  Cover lens made of transparent plastic
  
  Protects the controls against dirt and damage
  
  Operation still possible thanks to recesses for the operating knobs
- PS drive D12 (optional)
  
  Pivot support (360°) for wire feeders
  
  Wire feeder pivots 360° on the welding machine
  
  Increased working radius thanks to rotatability
  
  Wire feeder can be mounted and removed without tools
  
  When using on welding machines with casing type F.0006, option ON PS F06 1D01 must be present
  
  For use on Trolly XQ 55-5, option ON PS Trolly XQ 55-5 is required
  
  For use on Trolly 55-6, cross arm ON PS Trolly 55-5/55-6 is required
- Wheel set – facilitates work at frequently changing welding sites (optional)
  
  Wheel assembly kit
  
  Wheel set – facilitates work at frequently changing welding sites

eFeed wire feeder – full traction

eFeed wire feeder with ball bearings and four driven drive rolls – one more step forward

Exchange rolls in just three steps. Instantly, without tools and with captive parts

Unlock the roll fastener

Swivel out the captive roll fastener

Exchange the roll
Colour-coded rolls – prevent confusion

The different groove diameters in the wire feed rolls are colour-coded. The grooves for aluminium (U-groove), steel, stainless steel and braze (V-groove) and flux cored wire (knurled) are indicated with coloured clips.

e.g. UNI rolls for Ø 1.0 mm to 1.2 mm with V-groove (blue/red) for stainless steel, steel

e.g. ∅ 1 mm with U-groove (blue/yellow) for aluminium

e.g. Ø 1 mm with V-groove, knurled (blue/orange) for flux cored wire
The eFeed wire feeder is accurate, durable and robust. The transfer is carried out cleanly via cogwheels housed in the high-quality aluminium die-cast casing. This improves the welding result even for flux cored wires and particularly soft or particularly hard, unmanageable wires.

4-wheel drive, the right way
The four wire feed rolls are centrally driven by double ball bearing drive axles.

Effective inching
Wire inching takes place automatically and error-free with the eFeed. The casing can remain closed.

Quick roll changes
The wire feed rolls can be changed quickly without tools: simply loosen the lock, open the bracket and remove the rolls.

XQ series – overview of controls

HP-XQ

For perfectionists: The HP-XQ control offers the highest level of requirement-specific setting options for the relevant welding task. The user can individually determine every detail of the welding sequence from the ignition current to the end crater program. The HP-XQ is the ideal control for professional users who leave nothing to chance for perfect results.
LP-XQ

Turn it on and start welding: Welders can use the favourites button to save their preferred settings and retrieve them. The LP-XQ control has the best parameters for the required welding sequence from the ignition current to the end crater program set up ex works. This saves training time: simply enter the operating point using the click wheel and start your work. The control is perfect for changing welding personnel, for example on construction sites and for assembly work.
Expert XQ 2.0

Enjoy efficient working: The Expert XQ 2.0 control shows what the machine offers. The user simply needs to select the welding procedure, material, gas and wire diameter using the click wheel. The appropriate characteristic for the welding task (JOB) is immediately shown on the robust and easy-to-read LCD display and the welder is ready to go.
The control is available in the following variants and network capabilities: Expert XQ 2.0, Expert XQ 2.0 LG with integrated LAN gateway and Expert XQ 2.0 WLG with integrated LAN/Wi-Fi gateway.

EWM professional welding torch: re-discover welding

Professional welding torch
LED lighting with movement sensor:
turns on automatically when the welding torch is moved and illuminates the workpiece in the working area – for perfect visibility and best results (optional equipment).

Four operating variants – guaranteeing a good choice.

One standard torch and three function torches are available for the XQ series. The modern two-component grip with its rubber anti-kink device and stable ball joint is a role model for ergonomic perfection and robust EWM quality. There are different operating concepts and display options. It’s your choice!
RD3X function torch

Function torch with graphic display and LED light setting options:

Welding current and wire feed speed

Voltage correction

Welding procedure

Welding programs and tasks (JOBs)

Operating mode (non-latched/latched)

Component management: weld seams selected based on welding sequence plan
RD2X function torch

Function torch with graphic display and LED light setting options:

Welding current and wire feed speed

Voltage correction

Welding programs
PM 2U/DX

MIG/MAG function torch with LED light setting options:

Welding current and wire feed speed

Voltage correction

Program and JOB selection
Standard torch

Standard torch trigger for all MIG/MAG machines

Standard torch

Optional torch trigger on top

ewm Xnet

Welding 4.0 for large and small businesses. The modular system supports both welding coordination personnel and welders in their daily work.

XQ series accessories

XQ series
As you can expect from EWM, the system is well thought-out and each component tested under tough everyday conditions. Thanks to the extensive range of accessories, the welding machine can be customised to suit the individual needs of the welder and work environment. The work radius can be expanded easily. Welding parameters can be changed from any location using a remote control. The optional brackets provide space for many components. The optional cooling unit with a reinforced pump ensures that the welding torch is cooled well even over long distances and height differences.

Wire feeder accessories

Drive XQ
Whether manually setting the shielding gas flow, working on suspended workpieces or drum feeding: the Drive XQ wire feeder with its accompanying accessories can be easily customised for every user and every use.
Torch holder for drive XQ, drive 4X, drive 4 Basic and drive 4X IC
Wheel kit
Rubber feet to replace sliding rails
Crane suspension for safe and easy transportation
Heavy-duty set: safety plate and crane suspension
Connect wire feeder for wire feeding from drum
Flow meter for manual shielding gas flow setting
Stainless steel runners
Protective screen made of transparent plastic
Drive XQ IC 200
Weighing in at just 10 kg, this robust, resilient machine is perfect for work on shipyards and in hard-to-reach places.
Flow meter for manual shielding gas flow setting
360°-rotatable wire feeder
Stainless steel runners
Wheel set – facilitates work at frequently changing welding sites
Ideal for mobile use and frequently changing locations
Protective screen made of transparent plastic
Water cooling for wire feeder
Wire feed set for rolls with diameters greater than 1.6 mm

XQ machine documents

Here you can find documentation on the XQ series. For further documents and further operating instructions, please refer to our Online Shop

Brochures

Language	Title	Created	Info
de	MIG/MAG XQ puls - Broschüre	MIG/MAG XQ puls - Broschüre	2021-10-18	MIG/MAG XQ puls Broschüre Erleben Sie die neue Dimension der Welding 4.0-Welt von EWM: Entdecken Sie die Vorteile und Möglichkeiten der neuen MIG/MAG-Multiprozessschweißgeräte.
de	Titan XQ puls - Broschüre	Titan XQ puls - Broschüre	2018-12-07	Titan XQ puls Erleben Sie die neue Dimension der Welding 4.0-Welt von EWM: Entdecken Sie die Vorteile und Möglichkeiten des neuen MIG/MAG-Multiprozessschweißgeräts Titan XQ puls und des Welding 4.0-Schweißmanagement-Systems ewm Xnet auf mehr als 70 Seiten.
de	Titan XQ 400AC - Broschüre	Titan XQ 400AC - Broschüre	2018-10-01	Titan XQ 400 AC puls Ganz einfach saubere Schweißnähte: Lesen Sie, wie beim AC-Wechselstrom-Schweißprozess acArc puls XQ in der neuen Titan XQ 400 AC puls das MIG-Aluminiumschweißen im manuellen und im automatisierten Bereich noch einfacher wird.
de	PM-Schweißbrennerserie - Broschüre	PM-Standardschweißbrennner - Broschüre	2018-11-16	Profi-Schweißbrenner der PM-Serie Entdecken Sie in unserer Broschüre die vielen Vorteile der Profi-Schweißbrenner von EWM, wie die ergonomische Griffschalen mit Gummieinsätzen, die insbesondere in Zwangslagen die Arbeit erleichtern.
de	ewm Xnet - Broschüre	ewm Xnet - Broschüre	2018-05-04	Welding 4.0-Schweißmanagement-System ewm Xnet Der Schritt zu effizienter und ressourcenschonender Schweißtechnik geht über ewm Xnet. Werfen Sie einen Blick auf die intelligente und produktivitätssteigernde Vernetzung von Mensch und Maschinen für einen automatischen Datenfluss in der Produktionskette.
en	MIG/MAG XQ puls - Brochure	MIG/MAG XQ puls - Brochure	2021-10-18	MIG/MAG XQ puls Brochure Conquer the new dimension - welcome to the world of welding 4.0 by EWM. The EWM group delivers welding companies the ideal solution with the new multiprocess MIG/MAG XQ welding machines.
en	Titan XQ puls - Brochure	Titan XQ puls - Brochure	2018-12-07	Allow us to introduce: Titan XQ puls Welding 4.0 – the future of welding Conquer the new dimension - welcome to the world of welding 4.0 by EWM. The future of professional welding is networked, digital and paperless. These are the challenges of “Industry 4.0” and every company must face these sooner or later. The EWM group delivers welding companies the ideal solution with the new Titan XQ puls multiprocess MIG/ MAG welding machine and the Welding 4.0 welding management system ewm Xnet first-class future-proofability, for even more efficient, qualitative-certifiable welding.
en	Titan XQ 400AC - Brochure	Titan XQ 400AC - Brochure	2018-10-01	EWM acArc puls XQ − perfectly clean weld seams. With the AC welding process of the new Titan XQ 400 AC puls, MIG aluminium welding becomes even easier in both manual and automated sectors. Clean weld seams without residues of smoke on thin sheets, even with AlMg alloys, are possible with MIG-AC. With the acArc puls XQ proccess, the polarity switches between positive (pulse) and negative in the process, with the heat shifting from the material to the welding consumable. As such, air gaps are effectively bridged and welding fume emissions reduced.
en	PM welding torch series - Brochure	PM welding torch series - Brochure	2018-11-16	Professional welding torches from the PM series. The grips on the new PM welding torches are ergonomically optimised with rubber inserts in such a way that they can be held comfortably and flexibly guided during welding. This is a particular advantage during positional welding, making work easier. The balanced design of the grips, the reduced weight of the welding torch and the innovative, compact design of the hose package with anti-kink device also help reduce welder fatigue. It keeps the amount of force required to guide the welding torch to a minimum. The practical control buttons and graphic display on the PM welding torch also increase efficiency. They can be used to set many functions of the welding machine directly onto the workpiece.
en	ewm Xnet - Brochure	ewm Xnet - Brochure	2018-05-04	Welding 4.0 – ewm Xnet welding management system. A step towards more efficient and resource-saving welding technology Intelligent and productivity-boosting networking of man and machine for an automatic flow of data within the production chain: Industry 4.0 is now becoming established in welding production thanks to the new and innovative ewm Xnet Welding 4.0 welding management system. In this way, future concepts such as the smart factory and digital transformation effortlessly become reality.
fr	MIG/MAG XQ puls - Brochure	MIG/MAG XQ puls - Brochure	2021-10-18	MIG/MAG XQ puls Brochure Explorez la nouvelle dimension – bienvenue dans l’univers Welding 4.0 d’EWM. Avec le nouveau générateur de soudage multiprocédés MIG/MAG XQ puls et le système de gestion du soudage.
fr	Titan XQ puls - Brochure	Titan XQ puls - Brochure	2018-12-07	Nous vous présentons le Titan XQ puls Welding 4.0 – l’avenir du soudage. Explorez la nouvelle dimension – bienvenue dans l’univers Welding 4.0 d’EWM. L’avenir du soudage professionnel est connecté, numérique et dématérialisé. Telles sont les exigences de l’«industrie 4.0 », auxquelles toute entreprise doit répondre tôt ou tard. Avec le nouveau générateur de soudage multiprocédés MIG/MAG Titan XQ puls et le système de gestion du soudage Welding 4.0 ewm Xnet, EWM fournit la solution idéale pour les entreprises de soudage - un investissement d’avenir de premier ordre pour un soudage plus économique à la qualité certifiable.
fr	Titan XQ 400AC - Brochure	Titan XQ 400AC - Brochure	2018-10-01	EWM acArc puls XQ − des cordons de soudure soignés en toute simplicité Grâce au procédé de soudage à courant alternatif du nouveau Titan XQ 400 AC puls, le soudage MIG de l’aluminium est encore plus aisé dans les applications manuelles et automatisées. Des cordons de soudure soignés sans traces de fumée sont possibles sur des tôles ultrafines même en alliage de AlMg grâce au procédé MIG-AC.
fr	Torches de soudage de la série PM - Brochure	Torches de soudage de la série PM - Brochure	2018-11-16	Torches de soudage professionnelles de la série PM Avec leurs inserts en caoutchouc, les manettes des nouvelles torches de soudage PM ont une ergonomie optimisée qui les rend agréables à tenir et flexibles à guider pendant le soudage. Le travail est facilité, particulièrement dans les positions difficiles. Le design équilibré des manettes, le poids réduit des torches de soudage et le faisceau de flexibles innovant en format compact avec protection contre les plis contribuent également à un soudage sans fatigue.
fr	ewm Xnet - Brochure	ewm Xnet - Brochure	2018-05-04	Système de gestion du soudage Welding 4.0 ewm Xnet Un pas vers une technique de soudage plus efficace et plus économe en ressources La mise en réseau intelligente et productive de l’homme et des machines pour un flux de données automatique dans la chaîne de production : avec le nouveau système de gestion du soudage Welding 4.0 ewm Xnet, l’industrie 4.0 fait son entrée dans la fabrication par soudage. Des concepts d’avenir comme la « Smart factory » et la « Digital transformation » deviennent ainsi réalité sans dépenses importantes.
it	MIG/MAG XQ puls - Opuscolo	MIG/MAG XQ puls - Opuscolo	2021-10-18	MIG/MAG XQ puls Opuscolo Conquistate la nuova dimensione – benvenuti nel mondo Welding 4.0 di EWM. Con la nuova saldatrice multiprocesso MIG/MAG XQ puls e il sistema di gestione delle saldature.
it	Titan XQ puls - Opuscolo	Titan XQ puls - Opuscolo	2018-12-07	Una sicurezza: Titan XQ puls Welding 4.0 è il futuro della saldatura. Conquistate la nuova dimensione – benvenuti nel mondo Welding 4.0 di EWM. Il futuro della saldatura professionale è in rete, digitale e senza carta. Ogni azienda, prima o poi, dovrà affrontare le necessità poste da “Industria 4.0”. Con la nuova saldatrice multiprocesso MIG/MAG Titan XQ puls e il sistema di gestione delle saldature Welding 4.0 ewm Xnet, EWM fornisce la soluzione ideale per il futuro delle aziende attive nel settore della saldatura – Ottima qualità e solidità a prova di futuro per saldature ancora più economiche e certificabili.
it	ewm Xnet - Opuscolo	ewm Xnet - Opuscolo	2018-05-04	Sistema di Gestione delle Saldature Welding 4.0 ewm Xnet. Il passaggio verso una tecnica di saldatura più efficiente che risparmia maggiormente le risorse La messa in rete intelligente di uomo e macchine che aumenta la produttività per un flusso automatico dei dati nella catena della produzione: l’industria 4.0 si afferma anche nelle produzioni a mezzo saldatura con il nuovo e innovativo Sistema di Gestione delle Saldature Welding 4.0 ewm Xnet. Le idee del futuro, quali “Smart factory” e “Digital transformation” diventano realtà senza grandi spese.
es	MIG/MAG XQ puls - Folleto	MIG/MAG XQ puls - Folleto	2021-10-18	Permítanos presentarle: MIG/MAG XQ puls Welding 4.0: el futuro de la soldadura. Conquiste la nueva dimensión: bienvenido al mundo de la Welding 4.0 de EWM. Con la nueva Máquina de Soldadura Multiproceso MIG/MAG XQ puls y el Sistema de Gestión de Soldadura.
es	Titan XQ puls - Folleto	Titan XQ puls - Folleto	2018-12-07	Permítanos presentarle: Titan XQ puls Welding 4.0: el futuro de la soldadura. Conquiste la nueva dimensión: bienvenido al mundo de la Welding 4.0 de EWM. El futuro de la soldadura profesional está interconectado, es digital y ya no precisa papeles. Son los retos de la Industria 4.0 los que antes o después tendrá que afrontar cualquier empresa. Con la nueva Máquina de Soldadura Multiproceso MIG/MAGTitan XQ puls y el Sistema de Gestión de Soldadura Welding 4.0 ewm Xnet, EWM ofrece la solución ideal para las empresas de soldadura: resistencia futura de primera calidad para una soldadura aún más económica y de calidad certificable.
es	ewm Xnet - Folleto	ewm Xnet - Folleto	2018-05-04	Welding 4.0: Sistema de Gestión de Soldadura ewm Xnet El paso a una tecnología de soldadura más eficiente y respetuosa con los recursos La interconexión inteligente entre el hombre y la máquina que mejora la productividad para un flujo de datos automático en la cadena de producción: Con el nuevo Sistema de Gestión de Soldadura de Welding 4.0 ewm Xnet, la Industria 4.0 se impone también en la producción de soldadura. Conceptos futuristas como «Smart factory» o «Digital transformation» se harán realidad sin gran esfuerzo.
nl	MIG/MAG XQ puls - Brochure	MIG/MAG XQ puls - Brochure	2021-10-18	MIG/MAG XQ puls Brochure Verover de nieuwe dimensie – welkom in de wereld van Welding 4.0 van EWM. Met het nieuwe MIG/MAG-Multiproceslasapparaate MIG/MAG XQ puls.
nl	Titan XQ puls - Brochure	Titan XQ puls - Brochure	2018-12-07	Even voorstellen: Titan XQ puls Welding 4.0 – de toekomst van het lassen. Verover de nieuwe dimensie – welkom in de wereld van Welding 4.0 van EWM. De toekomst van professioneel lassen wordt in een netwerk geplaatst, digitaal en papierloos. Er zijn uitdagingen met "Industrie 4.0" waarmee elk bedrijf vroeg of laat wordt geconfronteerd. Met het nieuwe MIG/MAG-Multiproceslasapparaat Titan XQ puls en het Welding 4.0- lasmanagementsysteem ewm Xnet levert EWM de ideale oplossing voor laswerkzaamheden – uiterst toekomstgericht, voor nog zuiniger, kwalitatief lassen.
nl	ewm Xnet - Brochure	ewm Xnet - Brochure	2018-05-04	Welding 4.0-lasmanagementsysteem ewm Xnet De overstap naar een efficiënter gebruik van hulpbronnen voor de lastechniek De intelligente en productieverhogende verknoping tussen mens en machine voor een automatische gegevensstroom in de productieketen: Industrie 4.0 vestigt zich met het nieuwe innovatieve Welding 4.0-lasmanagementsysteem ewm Xnet ook in de lasproductie. Toekomstige concepten zoals "smart factory" en "digital transformation" worden zo zonder grote inspanning een realiteit.
sv	MIG/MAG XQ puls - Broschyr	MIG/MAG XQ puls - Broschyr	2021-10-18	MIG/MAG XQ puls broschyr Erövra den nya dimensionen välkommen till EWM:s Welding 4.0-värld. Med den nya MIG/MAG-multiprocess-svetsmaskinen XQ puls.
sv	Titan XQ puls - Broschyr	Titan XQ puls - Broschyr	2018-12-07	Tillåt mig att presentera: Titan XQ puls Welding 4.0 – svetsningens framtid. Erövra den nya dimensionen välkommen till EWM:s Welding 4.0-värld. Den professionella svetsningens framtid är uppkopplad, digital och papperslös. Det är kraven från ”Industri 4.0” som varje företag förr eller senare måste uppfylla. Med den nya MIG/MAG-multiprocess-svetsmaskinen Titan XQ puls och Welding 4.0 svetsstyrningssystem ewm Xnet levererar EWM den perfekta lösningen för svetsindustrin – framtidssäkrad högsta kvalitet, för ännu lönsammare svetsning av certifierbar kvalitet.
sv	ewm Xnet - Broschyr	ewm Xnet - Broschyr	2018-05-04	Welding 4.0-svetshanteringssystemet ewm Xnet Steget mot effektivare och mer resursbesparande svetsteknik En intelligent koppling mellan människa och maskin som förbättrar produktiviteten och ger ett automatisk dataflöde inom produktionskedjan: Industri 4.0 etablerar sig med det nya innovativa Welding 4.0-svetshanteringssystemet ewm Xnet även inom svetstillverkningen. Därmed blir framtidskoncept som ”Smart factory” och ”Digital transformation” verklighet utan stora kraftansträngningar.
pl	MIG/MAG XQ puls - Broszura	MIG/MAG XQ puls - Broszura	2021-10-18	MIG/MAG XQ puls broszura Przejdź do nowego wymiaru – witamy w świecie Welding 4.0 firmy EWM.
pl	Titan XQ puls - Broszura	Titan XQ puls - Broszura	2018-12-07	Oto ja: Titan XQ puls Welding 4.0 – przyszłość spawalnictwa. Przejdź do nowego wymiaru – witamy w świecie Welding 4.0 firmy EWM. Przyszłość profesjonalnego spawania jest połączona z siecią, cyfrowa i bez papieru. To są właśnie wyzwania „przemysłu 4.0”, na które każde przedsiębiorstwo musi wcześniej lub później odpowiedzieć. Wraz z nową spawarką wieloprocesową MIG/MAG Titan XQ puls oraz systemem zarządzania spawaniem Welding 4.0 ewm Xnet, firma EWM dostarcza idealne rozwiązanie dla przedsiębiorstw spawalniczych –znakomite przygotowanie na przyszłość, dzięki któremu spawanie staje się jeszcze bardziej ekonomiczne i udokumentowane jakościowo.
pl	ewm Xnet - Broszura	ewm Xnet - Broszura	2018-05-04	System zarządzania jakością spawania Welding 4.0 ewm X net Krok w stronę efektywnej i oszczędnej dla zasobów techn iki spawania Inteligentne i poprawiające produktywność połączenie człowieka i maszyny dla zapewnienia automatycznego przepływu danych w łańcuchu produkcyjnym: Przemysł 4.0 dzięki nowemu innowacyjnemu systemowi zarządzania jakością spawania Welding 4.0 ewm Xnet ugruntował swoją pozycję także w obszarze spawalnictwa. Koncepcje przyszłości, takie jak „Smart factory” i „Digital transformation” stają się w ten prosty sposób rzeczywistością.
ru	MIG/MAG XQ puls - брошюра	MIG/MAG XQ puls - брошюра	2021-10-18	MIG/MAG XQ puls брошюра Освойте новое измерение – добро пожаловать в мир сварки Welding 4.0 компании EWM.
ru	Titan XQ puls - брошюра	Titan XQ puls - брошюра	2018-12-07	Представляем: Titan XQ puls Welding 4.0 – будущее сварки. Освойте новое измерение – добро пожаловать в мир сварки Welding 4.0 компании EWM В будущем профессиональная сварка станет сетевой и цифровой и перестанет нуждаться в бумаге. Рано или поздно предприятиям придется приспособиться к этим требованиям «Индустрии 4.0». Новый аппарат с поддержкой нескольких методов сварки MIG/MAG Titan XQ puls и система управления сваркой Welding 4.0 ewm Xnet компании EWM представляют собой идеальное решение для сварочных предприятий – передовые технологии и высочайшее качество, еще более рентабельная сварка с возможностью сертификации результата.
ru	ewm Xnet - брошюра	ewm Xnet - брошюра	2018-05-04	Система управления сварочными процессами Welding 4.0 от ewm Xnet Еще один шаг к эффективной сварке с экономией ресурсов Интеллектуальное объединение действий человека и оборудования, повышающее итоговую производительность, для автоматического потока данных в производственной цепочке: Industrie 4.0 вместе с системой управления сварочными процессами Welding 4.0 от ewm Xnet также используется в сварочном производстве. Значит, такие будущие концепции, как «Smart factory» и «Digital transformation» станут реальностью без больших затрат.
hu	Titan XQ puls - Prospektus	Titan XQ puls - Prospektus	2018-12-07	Bemutatkoznék: Titan XQ puls Welding 4.0 – a hegesztés jövője. Hódítsa meg az új dimenziót – üdvözöljük az EWM Welding 4.0 világában. A professzionális hegesztés jövője hálózatba kötött, digitális és papírmentes. Ezek az „Ipar 4.0” kihívásai, amellyel előbb vagy utóbb minden vállalatnak szembe kell néznie. Az új Titan XQ MIG/MAG multifunkciós hegesztőgéppel és az ewm Xnet Welding 4.0 hegesztésirányítási rendszerrel az EWM a hegesztőüzemek számára ideális megoldást kínál – jövőálló, első osztályú minőség a még gazdaságosabb, minőségi tanúsítvánnyal rendelkező hegesztés érdekében.
hu	ewm Xnet - Prospektus	ewm Xnet - Prospektus	2018-05-04	ewm Xnet Welding 4.0-hegesztésirányító-rendszer Egy nagy lépés a hatékony és az erőforrásokat kímélő hegesztési technika felé Az ember és a gép intelligens és a termelékenységet növelő összekapcsolása a termelési láncban, az automatikus adatáramlás érdekében: Az Ipar 4.0 meghonosodik az új, innovatív ewm Xnet Welding 4.0 hegesztés irányító rendszerrel a hegesztő gyártásnál is. Az olyan jövőorientált koncepciók, mint a „Smart factory” és a „Digital transformation” így nagyobb ráfordítás nélkül is realitássá válnak.
cs	MIG/MAG XQ puls - Brožura	MIG/MAG XQ puls - Brožura	2021-10-18	MIG/MAG XQ puls brožura Objevte novou dimenzi – vítejte ve světě Welding 4.0 společnosti EWM.
cs	Titan XQ puls - Brožura	Titan XQ puls - Brožura	2018-12-07	Povoleno: Titan XQ puls Welding 4.0 – budoucnost svařování. Objevte novou dimenzi – vítejte ve světě Welding 4.0 společnosti EWM. Budoucnost profesionálního svařování je propojená do sítě, digitální a bezpapírová. Jedná se o výzvy „Průmyslu 4.0“, kterým se dříve nebo později musí postavit každý podnik. S novým multiprocesním svařovacím přístrojem MIG/MAG Titan XQ puls a systému řízení svařování Welding 4.0 ewm Xnet poskytuje společnost EWM ideální řešení pro svařovací provozy – do budoucna prvotřídní kvalita, pro ještě úspornější, kvalitativně certifikovatelné svařování.
cs	ewm Xnet - Brožura	ewm Xnet - Brožura	2018-05-04	Welding 4.0 systém managementu svařování ewm Xnet Krok k efektivní a zdroje šetřící svařovací technice Inteligentní a produktivitu zvyšující propojení lidí a strojů v síti pro automatický tok dat ve výrobním řetězci: Průmysl 4.0 se etabluje pomocí nového inovativního systému Welding 4.0 managementu svařování ewm Xnet i ve svařovací výrobě. Budoucí koncepce, jako „Smart factory“ a „Digital transformation“, se tak stanou realitou bez velkých nákladů.
tr	MIG/MAG XQ puls - Broşür	MIG/MAG XQ puls - Broşür	2021-10-18	MIG/MAG XQ puls broşür Yeni boyutu keşfedin – EWM'nin Welding 4.0 dünyasına hoş geldiniz.
tr	Titan XQ puls - Broşür	Titan XQ puls - Broşür	2018-12-07	İzninizle: Titan XQ puls Welding 4.0 – Kaynağın geleceği. Yeni boyutu keşfedin – EWM'nin Welding 4.0 dünyasına hoş geldiniz. Profesyonel kaynağın geleceği, ağ iletişimine sahip, dijital ve kağıtsızdır. Bunlar her işletmenin önce veya sonra sağlaması gereken "Endüstri 4.0" şartlarıdır. Yeni MIG/MAG çoklu işlem kaynak makinesi Titan XQ puls ve Welding 4.0 kaynak yönetim sistemi ewm Xnet ile EWM, kaynak işletmeleri için ideal bir çözüm sunmaktadır – Daha ekonomik, kalite sertifikalı kaynaklar için geleceğe dönük birinci sınıf kalite.
tr	ewm Xnet - Broşür	ewm Xnet - Broşür	2018-05-04	Welding 4.0 kaynak yönetim sistemi ewm Xnet Daha verimli ve doğal kaynakları koruyan bir kaynak teknolojisine doğru Üretim zincirinde otomatik veri akışı için, akıllı ve üretkenliği arttıran insan ve makine iletişimi: Endüstri 4.0, yeni yenilikçi Welding 4.0 kaynak yönetim sistemi ewm Xnet ile artık kaynak üretiminde de kendisini göstermektedir. "Akıllı fabrika" ve "Dijital dönüşüm" gibi geleceğe dönük konseptler, büyük zorluklar yaşanmadan gerçeğe dönüştürülür.
fi	MIG/MAG XQ puls - Esite	MIG/MAG XQ puls - Esite	2021-10-18	MIG/MAG XQ puls esite Koe uusi ulottuvuus – Tervetuloa EWM:n Welding 4.0 -maailmaan.
fi	Titan XQ puls - Esite	Titan XQ puls - Esite	2018-12-07	Esittelyssä: Titan XQ puls Welding 4.0 – hitsauksen tulevaisuus. Koe uusi ulottuvuus – Tervetuloa EWM:n Welding 4.0 -maailmaan. Ammattimaisen hitsauksen tulevaisuus on verkottunut, digitaalinen ja paperiton. Jokainen yritys kohtaa ennemmin tai myöhemmin "Teollisuus 4.0" -haasteet. Uudella MIG/MAG-moniprosessihitsauskoneella Titan XQ puls ja Welding 4.0 -hitsauksen hallintajärjestelmällä ewm Xnet EWM on ihanteellinen ratkaisu hitsaustyöpajoille – Tulevaisuuden kestävät ratkaisut mahdollistavat entistäkin taloudellisemman, laadultaan sertifioitavan hitsaustyön.
fi	ewm Xnet - Esite	ewm Xnet - Esite	2018-05-04	Welding 4.0 -hitsauksen hallintajärjestelmä ewm Xnet Askel kohti tehokasta ja resursseja säästävää hitsaustekniikkaa Ihmisten ja koneiden älykäs ja tuottavuutta lisäävä verkosto automaattisen datavirran tuottamiseksi tuotantoketjussa: Teollisuus 4.0 on tulossa myös hitsaustuotantoon uusien, innovatiivisten Hitsaus 4.0 -hallintajärjestelmien, kuten ewm Xnetin, kautta. Uudet käsitteet, kuten "älykäs tehdas" ja "digitaalinen muutos", muuttuvat todellisuudeksi hetkessä.
no	Titan XQ puls - Brosjyre	Titan XQ puls - Brosjyre	2018-12-07	Utstyrt: Titan XQ puls Welding 4.0 – sveisingens fremtid. Erobre den nye dimensjonen – velkommen til EWMs nye Welding 4.0-verden. Fremtiden for profesjonell sveising er nettverk, digital og papirløs. Dette er utfordringene fra «Industri 4.0», som alle selskaper før eller siden vil måtte ta stilling til. Med det nye MIG-/MAG-multiprosessveiseapparatet Titan XQ puls og Welding 4.0-sveisestyringssystemet ewm Xnet leverer EWM den ideelle løsningen for sveisefirma – fremtidsrettet og av ypperste kvalitet, for enda mer lønnsom, kvalitativ sertifiserbar sveising.
no	ewm Xnet - Brosjyre	ewm Xnet - Brosjyre	2018-05-04	Welding 4.0-sveisestyringssystemet ewm Xnet Skrittet mot effektiv sveiseteknikk som er skånsom mot ressursene Intelligent og produktivitetsøkende nettverk av mennesker og maskiner for automatisk dataflyt i produksjonskjeden: Industri 4.0 etablerer seg også innen sveiseproduksjon med det nye, innovative Welding 4.0-sveisestyringssystemet ewm Xnet. Fremtidskonsepter som «smartfabrikker» og «digitaltransformasjon» blir slik en realitet, uten mye styr.

Flyer

Format	Language	Title	Created	Info
	Sprache

Operating instructions

Format	Title	Created	Info
	Titan XQ puls - Betriebsanleitung	Titan XQ puls - Betriebsanleitung
	Drive XQ - Betriebsanleitung	Drive XQ - Betriebsanleitung
	HP XQ - Betriebsanleitung	HP XQ - Betriebsanleitung
	LP XQ - Betriebsanleitung	LP XQ - Betriebsanleitung
	Expert XQ 2.0 - Betriebsanleitung	Expert XQ 2.0 XQ - Betriebsanleitung
	Titan XQ puls - Manual	Titan XQ puls - Manual
	Drive XQ - Manual	Drive XQ - Manual
	HP XQ - Manual	HP XQ - Manual
	LP XQ - Manual	LP XQ - Manual
	Expert XQ 2.0 - Manual	Expert XQ 2.0 - Manual
	Titan XQ puls - Notice d´utilisation	Titan XQ puls - Notice d´utilisation
	Drive XQ - Notice d´utilisation	Drive XQ - Notice d´utilisation
	HP XQ - Notice d´utilisation	HP XQ - Notice d´utilisation
	LP XQ - Notice d´utilisation	LP XQ - Notice d´utilisation
	Expert XQ 2.0 - Notice d´utilisation	Expert XQ 2.0 - Notice d´utilisation
	Titan XQ puls - Manuale d´uso	Titan XQ puls - Manuale d´uso
	Drive XQ - Manuale d´uso	Drive XQ - Manuale d´uso
	HP XQ - Manuale d´uso	HP XQ - Manuale d´uso
	LP XQ - Manuale d´uso	LP XQ - Manuale d´uso
	Expert XQ 2.0 - Manuale d´uso	Expert XQ 2.0 - Manuale d´uso
	Titan XQ puls - Manual de instrucciones	Titan XQ puls - Manual de instrucciones
	Drive XQ - Manual de instrucciones	Drive XQ - Manual de instrucciones
	HP XQ - Manual de instrucciones	HP XQ - Manual de instrucciones
	LP XQ - Manual de instrucciones	LP XQ - Manual de instrucciones
	Expert XQ 2.0 - Manual de instrucciones	Expert XQ 2.0 - Manual de instrucciones
	Titan XQ puls - Bedieningshandleiding	Titan XQ puls - Bedieningshandleiding
	Drive XQ - Bedieningshandleiding	Drive XQ - Bedieningshandleiding
	HP XQ - Bedieningshandleiding	HP XQ - Bedieningshandleiding
	LP XQ - Bedieningshandleiding	LP XQ - Bedieningshandleiding
	Expert XQ 2.0 - Bedieningshandleiding	Expert XQ 2.0 - Bedieningshandleiding
	Titan XQ puls - Bruksanvisning	Titan XQ puls - Bruksanvisning
	Drive XQ - Bruksanvisning	Drive XQ - Bruksanvisning
	HP XQ - Bruksanvisning	HP XQ - Bruksanvisning
	LP XQ - Bruksanvisning	LP XQ - Bruksanvisning
	Expert XQ 2.0 - Bruksanvisning	Expert XQ 2.0 - Bruksanvisning
	Titan XQ puls - Instrukcja obsługi	Titan XQ puls - Instrukcja obsługi
	Drive XQ - Instrukcja obsługi	Drive XQ - Instrukcja obsługi
	HP XQ - Instrukcja obsługi	HP XQ - Instrukcja obsługi
	LP XQ - Instrukcja obsługi	LP XQ - Instrukcja obsługi
	Expert XQ 2.0 - Instrukcja obsługi	Expert XQ 2.0 - Instrukcja obsługi
	Titan XQ puls - Руководство по эксплуатации	Titan XQ puls - Руководство по эксплуатации
	Drive XQ - Руководство по эксплуатации	Drive XQ - Руководство по эксплуатации
	HP XQ - Руководство по эксплуатации	HP XQ - Руководство по эксплуатации
	LP XQ - Руководство по эксплуатации	LP XQ - Руководство по эксплуатации
	Expert XQ 2.0 - Руководство по эксплуатации	Expert XQ 2.0 - Руководство по эксплуатации
	Titan XQ puls - Üzemeltetési utasítás	Titan XQ puls - Üzemeltetési utasítás
	Drive XQ - Üzemeltetési utasítás	Drive XQ - Üzemeltetési utasítás
	HP XQ - Üzemeltetési utasítás	HP XQ - Üzemeltetési utasítás
	LP XQ - Üzemeltetési utasítás	LP XQ - Üzemeltetési utasítás
	Expert XQ 2.0 - Üzemeltetési utasítás	Expert XQ 2.0 - Üzemeltetési utasítás
	Titan XQ puls - Návody k obsluze	Titan XQ puls - Návody k obsluze
	Drive XQ - Návody k obsluze	Drive XQ - Návody k obsluze
	HP XQ - Návody k obsluze	HP XQ - Návody k obsluze
	LP XQ - Návody k obsluze	LP XQ - Návody k obsluze
	Expert XQ 2.0 - Návody k obsluze	Expert XQ 2.0 - Návody k obsluze
	Titan XQ puls - Kullanim kilavuzu	Titan XQ puls - Kullanim kilavuzu
	Drive XQ - Kullanim kilavuzu	Drive XQ - Kullanim kilavuzu
	HP XQ - Kullanim kilavuzu	HP XQ - Kullanim kilavuzu
	LP XQ - Kullanim kilavuzu	LP XQ - Kullanim kilavuzu
	Expert XQ 2.0 - Kullanim kilavuzu	Expert XQ 2.0 - Kullanim kilavuzu
	Titan XQ puls - Käyttöohje	Titan XQ puls - Käyttöohje
	Drive XQ - Käyttöohje	Drive XQ - Käyttöohje
	HP XQ - Käyttöohje	HP XQ - Käyttöohje
	LP XQ - Käyttöohje	LP XQ - Käyttöohje
	Expert XQ 2.0 - Käyttöohje	Expert XQ 2.0 - Käyttöohje
	HP XQ - Manual de instruções	HP XQ - Manual de instruções
	LP XQ - Manual de instruções	LP XQ - Manual de instruções
	Expert XQ 2.0 - Manual de instruções	Expert XQ 2.0 - Manual de instruções

Contact

Givenname *

Surname *

Company

Phone

Mail *

Enter the subject of your message here.

Message * These fields are required
** Information on data protection and the cookie policies can also be found in the data privacy statement on our website.

I have read and accept the data protection regulations and cookie policies.

Modular (close)

Overview

Technical data – Phoenix XQ 355 puls

Version	Phoenix XQ 355 puls D
Setting range for welding current	5 A - 350 A
Duty cycle 40 °C	350 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	18.8 kVA
Power consumption Pi	23 W
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	625 mm x 298 mm x 531 mm
	24.6 inch x 11.7 inch x 20.9 inch
Weight	39.4 kg / 86.9 lbs
Standards	IEC 60974-1 and -10 CL.A

Technical data – Phoenix XQ 405 puls

Version	Phoenix XQ 405 puls D
Setting range for welding current	5 A - 400 A
Duty cycle 40 °C	400 A / 60 %
	350 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	23.2 kVA
Power consumption Pi	23 W
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	625 mm x 298 mm x 531 mm
	24.6 inch x 11.7 inch x 20.9 inch
Weight	39.4 kg / 86.9 lbs
Standards	IEC 60974-1 and -10 CL.A

Technical data – Phoenix XQ 505 puls

Version	Phoenix XQ 505 puls D
Setting range for welding current	5 A - 500 A
Duty cycle 40 °C	500 A / 40 %
	430 A / 60 %
	370 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	33.2 kVA
Power consumption Pi	23 W
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	625 mm x 298 mm x 531 mm
	24.6 inch x 11.7 inch x 20.9 inch
Weight	42.7 kg / 94.2 lbs
Standards	IEC 60974-1 and -10 CL.A

Technical data – cool50-2 U40

Type	cool50-2 U40
Mains voltage	1 x 400 V
Mains frequency	50 Hz / 60 Hz
Cooling capacity at 1 l/min.	1000 W
Pump pressure	3.5 bar
Tank capacity	5.5 l
Protection classification (mounted state)	IP23
Safety marking
Dimensions (L x B x H)	695 mm x 298 mm x 329 mm
	27.4 inch x 11.7 inch x 13 inch
Weight	21 kg / 46.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

High-performance cooling unit for water-cooled welding torches – also available with reinforced pump for extra-long hose packages.

Technical data – cool50-2 U42

Type	cool50-2 U42
Mains voltage	1 x 400 V
Mains frequency	50 Hz / 60 Hz
Cooling capacity at 1 l/min.	1000 W
Pump pressure	4.5 bar
Tank capacity	5.5 l
Protection classification (mounted state)	IP23
Safety marking
Dimensions (L x B x H)	695 mm x 298 mm x 329 mm
	27.4 inch x 11.7 inch x 13 inch
Weight	21 kg / 46.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Cooling unit with reinforced pump for use with extra-long hose packages

Phoenix XQ puls welding processes

Welding process finder

rootArc® XQ/rootArc® puls XQ

forceArc® XQ/forceArc® puls XQ

Positionweld XQ for aluminium

superPuls

Puls

Standard (MIG/MAG)

TIG and MMA welding

Gouging

Technical data – Taurus XQ 355 Synergic

Version	Taurus XQ 355 Synergic D
Setting range for welding current	5 A - 350 A
Duty cycle 40 °C	350 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	18.8 kVA
Power consumption Pi	23 W
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	625 mm x 298 mm x 531 mm
	24.6 inch x 11.7 inch x 20.9 inch
Weight	39.4 kg / 86.9 lbs
Standards	IEC 60974-1 and -10 CL.A

Technical data – Taurus XQ 405 Synergic

Version	Taurus XQ 405 Synergic D
Setting range for welding current	5 A - 400 A
Duty cycle 40 °C	400 A / 60 %
	350 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	23.2 kVA
Power consumption Pi	23 W
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	625 mm x 298 mm x 531 mm
	24.6 inch x 11.7 inch x 20.9 inch
Weight	39.4 kg / 86.9 lbs
Standards	IEC 60974-1 and -10 CL.A

Technical data – Taurus XQ 505 Synergic

Version	Taurus XQ 505 Synergic D
Setting range for welding current	5 A - 500 A
Duty cycle 40 °C	500 A / 40 %
	430 A / 60 %
	370 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	33.2 kVA
Power consumption Pi	23 W
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	625 mm x 298 mm x 531 mm
	24.6 inch x 11.7 inch x 20.9 inch
Weight	42.7 kg / 94.2 lbs
Standards	IEC 60974-1 and -10 CL.A

Technical data – cool50-2 U40

Type	cool50-2 U40
Mains voltage	1 x 400 V
Mains frequency	50 Hz / 60 Hz
Cooling capacity at 1 l/min.	1000 W
Pump pressure	3.5 bar
Tank capacity	5.5 l
Protection classification (mounted state)	IP23
Safety marking
Dimensions (L x B x H)	695 mm x 298 mm x 329 mm
	27.4 inch x 11.7 inch x 13 inch
Weight	21 kg / 46.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

High-performance cooling unit for water-cooled welding torches – also available with reinforced pump for extra-long hose packages.

Technical data – cool50-2 U42

Type	cool50-2 U42
Mains voltage	1 x 400 V
Mains frequency	50 Hz / 60 Hz
Cooling capacity at 1 l/min.	1000 W
Pump pressure	4.5 bar
Tank capacity	5.5 l
Protection classification (mounted state)	IP23
Safety marking
Dimensions (L x B x H)	695 mm x 298 mm x 329 mm
	27.4 inch x 11.7 inch x 13 inch
Weight	21 kg / 46.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Cooling unit with reinforced pump for use with extra-long hose packages

Taurus XQ Synergic welding processes

Welding process finder

rootArc® XQ

forceArc® XQ

superPuls

Standard (MIG/MAG)

TIG and MMA welding

Gouging

Technical data – Taurus XQ 355 Basic

Version	Taurus XQ 355 Basic D
Setting range for welding current	5 A - 350 A
Duty cycle 40 °C	350 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	18.8 kVA
Power consumption Pi	23 W
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	625 mm x 298 mm x 531 mm
	24.6 inch x 11.7 inch x 20.9 inch
Weight	39.4 kg / 86.9 lbs
Standards	IEC 60974-1 and -10 CL.A

Technical data – Taurus XQ 405 Basic

Version	Taurus XQ 405 Basic D
Setting range for welding current	5 A - 400 A
Duty cycle 40 °C	400 A / 60 %
	350 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	23.2 kVA
Power consumption Pi	23 W
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	625 mm x 298 mm x 531 mm
	24.6 inch x 11.7 inch x 20.9 inch
Weight	39.4 kg / 86.9 lbs
Standards	IEC 60974-1 and -10 CL.A

Technical data – Taurus XQ 505 Basic

Version	Taurus XQ 505 Basic D
Setting range for welding current	5 A - 500 A
Duty cycle 40 °C	500 A / 40 %
	430 A / 60 %
	370 A / 100 %
Open circuit voltage	82 V
Mains voltage	3 x 400 V
Tolerances	-25 % up to +20 %
Mains frequency	50 Hz / 60 Hz
Recommended generator power	33.2 kVA
Power consumption Pi	23 W
Protection classification	IP23
Test mark
EMC class	A
Dimensions (L x B x H)	625 mm x 298 mm x 531 mm
	24.6 inch x 11.7 inch x 20.9 inch
Weight	42.7 kg / 94.2 lbs
Standards	IEC 60974-1 and -10 CL.A

Technical data – cool50-2 U40

Type	cool50-2 U40
Mains voltage	1 x 400 V
Mains frequency	50 Hz / 60 Hz
Cooling capacity at 1 l/min.	1000 W
Pump pressure	3.5 bar
Tank capacity	5.5 l
Protection classification (mounted state)	IP23
Safety marking
Dimensions (L x B x H)	695 mm x 298 mm x 329 mm
	27.4 inch x 11.7 inch x 13 inch
Weight	21 kg / 46.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

High-performance cooling unit for water-cooled welding torches – also available with reinforced pump for extra-long hose packages.

Technical data – cool50-2 U42

Type	cool50-2 U42
Mains voltage	1 x 400 V
Mains frequency	50 Hz / 60 Hz
Cooling capacity at 1 l/min.	1000 W
Pump pressure	4.5 bar
Tank capacity	5.5 l
Protection classification (mounted state)	IP23
Safety marking
Dimensions (L x B x H)	695 mm x 298 mm x 329 mm
	27.4 inch x 11.7 inch x 13 inch
Weight	21 kg / 46.3 lbs
Standards	IEC 60974-1, -2 and -10 CL.A

Cooling unit with reinforced pump for use with extra-long hose packages

Taurus XQ Basic welding processes

Welding process finder

Standard (MIG/MAG)

TIG and MMA welding

Gouging

Overview of the EWM XQ series
/   rootArc® XQ/rootArc® puls XQ

/   forceArc® XQ/forceArc® puls XQ

/   Positionweld for aluminium

/   Standard (MIG/MAG)

/   Pulse

/   superPuls

/   TIG

/   MMA

/   Gouging
/   rootArc® XQ

/   forceArc® XQ

/   Standard (MIG/MAG)

/   superPuls

/   TIG

/   MMA

/   Gouging
/   Standard (MIG/MAG)

/   TIG

/   MMA

/   Gouging
The XQ welding processes:

rootArc XQ/rootArc puls XQ – Perfect root welding, easy-to-execute filler and final passes

forceArc XQ/forceArc puls XQ – Powerful high-performance arc with deep penetration

Standard (MIG/MAG) – Perfect short and spray arcs

Pulse – Low-spatter pulsed arc
Positionweld – Simple positional welding without the “Christmas tree” technique

superPuls – Heat-reduced interval welding between two operating points (high-current and low-current phases freely adjustable)

XQ series – Modular casing system for workstations in all kinds of environments

XQ – Modular casing system for workstations in all kinds of environments. Gas or water cooled. Flexible design: suitable for use both in production or as a mobile machine on the construction site or job. Portable or mobile on a Trolly. Space-saving and lightweight design guarantees flexibility and mobility.

Phoenix XQ puls decompact
Taurus XQ Synergic decompact
With a wide range of options and accessories for the welding machine, as well as for the Drive XQ or Drive XQ IC 200 wire feeders, the 355, 405 and 505 models (either gas or water cooled) can be adapted to any and all requirements.
Taurus XQ Basic decompact
With a wide range of options and accessories for the Drive XQ Basic wire feeder, the 355 A, 405 A and 505 A models (either gas or water cooled) can be adapted to any and all requirements.

XQ series – Modular casing system for workstations in all kinds of environments

Different Trolly models Workshop or construction site Trolly? There are three models to choose from:

Trolly XQ 55-5

Transport cart, 4 rollers
Solid, stable design
For transporting a power source, a cooling unit and a shielding gas cylinder
Optional torch holder available
Trolly 55-6

Transport cart, 4 rollers
Solid, stable design
For transporting a power source, a cooling unit and one or two shielding gas cylinders
Can be lifted by crane as standard
Supplied with braking rollers
Trolly 35-6

Transport cart, 2 rollers
Solid, stable design
Best suited to particularly uneven areas
For holding a power source and a wire feeder

Drive XQ wire feeders – great options to make life easier

Drive XQ wire feeder
At just 13 kg (excl. wire spool) and with a balanced, ergonomic handle, the Drive XQ wire feeder is the perfect companion for impassable scaffolding, hard-to-reach work spaces or large components – it can even fit through manholes.
- MIG/MAG wire feeder for XQ welding machines
  
  Suitable for 200-mm or 300-mm wire spools
  
  Easy to transport thanks to its low weight and compact design
  
  Interior lighting
  
  Stable base construction (continuous cast aluminium) with sliding rails as standard
  
  Transparent protective cap – welding parameters visible at all times
  
  Robust electronics protected in a dust-free area
  
  Protected arrangement of connections for intermediate hose packages and control cables
  
  Non-specialist staff can change hose packages without tools
  
  eFeed: innovative 4-roll drive (quadruple meshing)
  
  Equipped with 1.0–1.2-mm UNI rolls for low to high-alloy steel
- DGC – electronic gas flow control: Save gas with ease and accuracy (optional)
  
  Prevents welding errors caused by too much or too little gas
  
  Efficiency through gas savings thanks to accurate settings
  
  Fully reproducible thanks to digital configuration and saving to the respective JOB (welding task)
  
  Constant gas flow rate thanks to electronic adjustment
  
  Digital display of nominal and actual gas flow rate values in l/min
  
  Extremely advantageous with long hose packages, e.g. for shipbuilding and steel construction
  
  No gas blast with turbulence when igniting the arc as the electrical valve opens and closes gently
- WRS – wire reserve sensor: no unexpected occurrences during welding
  
  The sensor warns at 10% residual quantity of the wire spool by means of a control lamp.
  
  It reduces the risk of seam errors occurring due to the wire running out during welding.
  
  A spool change can be planned in advance, which reduces downtime.
- WHS – wire spool heater: regulated heat for better seam quality (optional)
  
  The wire is pre-heated, which reduces the build-up of moisture on the welding wire.
  
  The temperature is regulated at 50 °C (adjustable).
  
  The welding results are perfect, especially for aluminium.
- Electrode holder connection (optional)
  
  Ideal for MMA welding
  
  Ideal for gouging
Drive XQ IC 200 wire feeder
Weighing in at just 10 kg, this robust, resilient machine is perfect for work on shipyards and in hard-to-reach places.
- Drive XQ IC 200 wire feeder
  
  MIG/MAG wire feeder for XQ welding machines
  
  Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires
  
  Easy to transport thanks to its low weight and compact design
  
  Suitable for 5-kg D200 wire spools
  
  Lightweight and robust design, ideal for shipyard applications
  
  Robust electronics protected in a dust-free area
  
  Optionally with integrated flow meter
- Flow meter (optional)
  
  Optional analogue gas flow rate adjustment with gas flow meter
  
  Flow meter for setting the shielding gas flow manually
  
  Precise setting and checking of the gas quantity at the welding site
  
  Extremely advantageous with long hose packages, e.g. for shipbuilding and steel construction
- Securely connected
  
  Retrofitting option: Water cooling for wire feeder
  
  Key switch – control shut-off to protect against operator error
  
  Tool-free changing of intermediate hose packages
  
  Easy-to-access, internal hose package connections, fully protected thanks to cover cap
  
  Strain-relieved hose package thanks to quick connect coupling system
- Handle/ON TG D12 (optional)
  
  Retrofitting option: Carrying handle and strap
- Transparent cover lens
  
  Transparent cover lens for wire feed controls
  
  Cover lens made of transparent plastic
  
  Protects the controls against dirt and damage
  
  Operation still possible thanks to recesses for the operating knobs
- PS drive D12 (optional)
  
  Pivot support (360°) for wire feeders
  
  Wire feeder pivots 360° on the welding machine
  
  Increased working radius thanks to rotatability
  
  Wire feeder can be mounted and removed without tools
  
  When using on welding machines with casing type F.0006, option ON PS F06 1D01 must be present
  
  For use on Trolly XQ 55-5, option ON PS Trolly XQ 55-5 is required
  
  For use on Trolly 55-6, cross arm ON PS Trolly 55-5/55-6 is required
- Wheel set – facilitates work at frequently changing welding sites (optional)
  
  Wheel assembly kit
  
  Wheel set – facilitates work at frequently changing welding sites

eFeed wire feeder – full traction

eFeed wire feeder with ball bearings and four driven drive rolls – one more step forward

Exchange rolls in just three steps. Instantly, without tools and with captive parts

Unlock the roll fastener

Swivel out the captive roll fastener

Exchange the roll
Colour-coded rolls – prevent confusion

The different groove diameters in the wire feed rolls are colour-coded. The grooves for aluminium (U-groove), steel, stainless steel and braze (V-groove) and flux cored wire (knurled) are indicated with coloured clips.

e.g. UNI rolls for Ø 1.0 mm to 1.2 mm with V-groove (blue/red) for stainless steel, steel

e.g. ∅ 1 mm with U-groove (blue/yellow) for aluminium

e.g. Ø 1 mm with V-groove, knurled (blue/orange) for flux cored wire
The eFeed wire feeder is accurate, durable and robust. The transfer is carried out cleanly via cogwheels housed in the high-quality aluminium die-cast casing. This improves the welding result even for flux cored wires and particularly soft or particularly hard, unmanageable wires.

4-wheel drive, the right way
The four wire feed rolls are centrally driven by double ball bearing drive axles.

Effective inching
Wire inching takes place automatically and error-free with the eFeed. The casing can remain closed.

Quick roll changes
The wire feed rolls can be changed quickly without tools: simply loosen the lock, open the bracket and remove the rolls.

XQ series – Overview of controls

HP-XQ

For perfectionists: The HP-XQ control offers the highest level of requirement-specific settings options for the relevant welding task. The user can individually determine every detail of the welding sequence, from the ignition current to the end crater program. The HP-XQ is the ideal control for professional users who leave nothing to chance for perfect results.
LP-XQ

Switch it on and start welding: Welders can use the favourites button to save their preferred settings and retrieve them. The LP-XQ control has the best parameters for every required welding sequence set up ex works – from the ignition current to the end crater program. This saves training time: simply set the operating point using the click wheel and start working. This control is perfect when the welding personnel are constantly changing, for example on construction sites and for assembly work.
Expert XQ 2.0

Enjoy efficient working: The Expert XQ 2.0 control shows what the machine can do. The user simply needs to select the welding procedure, material, gas and wire diameter using the click wheel. The appropriate characteristic for the welding task (JOB) is immediately shown on the robust and easy-to-read LCD display and the welder is ready to go.
The control is available in the following variants and with the following networking capabilities: Expert XQ 2.0, Expert XQ 2.0 LG with integrated LAN gateway and Expert XQ 2.0 WLG with integrated LAN/Wi-Fi gateway.
Basic XQ

Experienced welders can set the operating point with precision using the two rotary knobs and then conveniently save and reload the settings with one of the five favourites buttons. The Basic XQ control is available for the Drive XQ in conjunction with the Taurus XQ Basic power source.

EWM professional welding torch: re-discover welding

Four operating variants – guaranteeing a good choice.

One standard torch and three function torches are available for the XQ series. The modern two-component grip with its rubber anti-kink device and stable ball joint is a role model for ergonomic perfection and robust EWM quality. There are different operating concepts and display options. It’s your choice!
RD3X function torch

Function torch with graphic display and LED light setting options:

Welding current and wire feed speed

Voltage correction

Welding procedure

Welding programs and tasks (JOBs)

Operating mode (non-latched/latched)

Component management: weld seams selected based on welding sequence plan
RD2X function torch

Function torch with graphic display and LED light setting options:

Welding current and wire feed speed

Voltage correction

Welding programs
PM 2U/DX

MIG/MAG function torch with LED light setting options:

Welding current and wire feed speed

Voltage correction

Program and JOB selection
Standard torch

Standard torch trigger for all MIG/MAG machines

Standard torch

Optional torch trigger on top

ewm Xnet

Welding 4.0 for large and small businesses. The modular system supports both welding coordination personnel and welders in their daily work.

XQ series modular accessories

XQ series
As you can expect from EWM, the system is well thought-out and each component has been tested under tough everyday conditions. Thanks to the extensive range of accessories, the welding machine can be customised to suit the individual needs of the welder and work environment. The working radius can be expanded easily. Welding parameters can be changed from any location using a remote control. The optional brackets provide space for many components. The optional cooling unit with a reinforced pump ensures that the welding torch is cooled well even over long distances and height differences.

Wire feeder accessories

Drive XQ
Whether manually setting the shielding gas flow, working on suspended workpieces or drum feeding: the Drive XQ wire feeder with its accompanying accessories can be easily customised for every user and every use.
Torch holder for drive XQ, drive 4X, drive 4 Basic and drive 4X IC
Wheel kit
Rubber feet to replace sliding rails
Crane suspension for safe and easy transportation
Heavy-duty set: safety plate and crane suspension
Connect wire feeder for wire feeding from drum
Flow meter for manual shielding gas flow setting
Stainless steel runners
Protective screen made of transparent plastic
Drive XQ IC 200
Weighing in at just 10 kg, this robust, resilient machine is perfect for work on shipyards and in hard-to-reach places.
Flow meter for manual shielding gas flow setting
360°-rotatable wire feeder
Stainless steel runners
Wheel set – facilitates work at frequently changing welding sites
Ideal for mobile use and frequently changing locations
Protective screen made of transparent plastic
Water cooling for wire feeder
Wire feed set for rolls with diameters greater than 1.6 mm

XQ machine documents